Quick Start Guide

Zigbee/802.15.4 Evaluation Kit, Rev. 0.0
6 Freescale Semiconductor
Demonstration Applications
6 Demonstration Applications
The EVK package contains a CD with several different demonstration applications that highlight various
features of the 802.15.4 standard. These applications are for evaluation purpose only.
This section provides an overview of the delivered demonstration applications.
6.1 DIG-528-2 Demonstration Applications
The demonstration applications for the DIG-528-2 PCB use version 1.03 of the MAC and PHY layer.
There is no network layer in the demonstration applications. All demonstration applications use the
Embedded Bootloader for simplified firmware updates. For more information on the Embedded
Bootloader, refer the Embedded Bootloader User’s Guide, document number MC13192FLUG/D.
Figure 3. DIG-528-2 PTC Application Layers
6.1.1 PTC Demonstration Application:
The PTC is a user interactive application. Users can send commands from the Personal Computer (PC) to
the PTC demonstration application to perform different actions. For example, read/write memory and RF
and send/receive data from/to the connected PC. To use the PCB application, two PCBs are required.
Refer to Zigbee.hlp (see Test Tool installation directory.\help) and the PTC Demonstration Application
Note, AN2771/D for more details.
PTC Application
Non Volatile Memory
802.15.4 PHY
Device
Driver
UART or
USB
Embedded Bootloader
802.15.4 MAC
MC908HCS08GB60/-GT60/MC13192
Test Tool
UART or
USB
RS232
PC