Quick Start Guide

Printed Circuit Board Overview
Zigbee/802.15.4 Evaluation Kit, Rev. 0.0
Freescale Semiconductor 5
5.2 DIG-536-2 Board
The DIG-536-2 has the following hardware and interface components:
• An RS232 UART communication interface
• Four push buttons
• One reset button
• Four LEDs
• One power switch
• A dipole antenna (Refer to AN2731 for more information.)
• The board contains an X-, Y-, and Z-axis accelerometer. The accelerometers can be disabled by
removing jumper J105
• Powered by an external power adaptor
Figure 2. DIG-536-2 PCB (52x81 mm)
Refer to the EVK Hardware Description Application Note, AN2731/D for more details on antennas and
LNAs.