Quick Start Guide

Zigbee/802.15.4 Evaluation Kit, Rev. 0.0
4 Freescale Semiconductor
Printed Circuit Board Overview
5 Printed Circuit Board Overview
As already stated, the EVK package contains two PCBs. The DIG-528-2 EVK board and the DIG-536-2
ARD board. This section highlights the hardware on both PCBs.
5.1 DIG-528-2 Board
The DIG-528-2 contains the following interfaces and hardware.
• One USB port
• An RS232 UART communication interface
• Four push buttons
• One reset button
• Four LEDs
• One power switch
• One F-antenna (Refer to AN2731 for more information.)
• Optional Low Noise Amplifier (LNA) can be enabled
• Powered through the USB connector
Figure 1. DIG-528-2 PCB (50x100 mm)
Refer to the EVK Hardware Description Application Note, AN2731/D for more details on antennas and
LNAs.