Quick Start Guide

References
Zigbee/802.15.4 Evaluation Kit, Rev. 0.0
Freescale Semiconductor 3
3 References
The following documents were used as references to build this application note.
1. 802.15.4 MAC/PHY Software Reference Manual, 802154MPSRM/D
2. Zigbee.hlp (see Test Tool installation directory.\help)
3. PTC Demonstration Application Note, AN2771/D
4. Switch Demonstration Application Note, AN2773/D
5. Embedded Bootloader User's Guide, MC13192FLUG/D
6. HCSO8 Flash Library Application Note, AN2770/D
7. EVK Hardware Description Application Note, AN2731/D
8. HCS08 Micro controllers Data Sheet, MC9S0GB60/GT60
9. MC13192 Transceiver Data Sheet, MC13192DS/D
10. PCB Dependency Application Note, AN2769/D
4 Primary Processor Overview
The EVK package contains two PCBs. The DIG-528-2 EVK board and the DIG-536-2 ARD board. The
two primary processors on the PCBs are the Freescale MC908HCS08 GT60 MCU and the Freescale MC
13192 RF chip.
4.1 MCU MC908HCS08 GT60 Processor
The MC908HCS08 GT60 is a member of Freescale's 8 bit, low-cost, high-performance HCS08 family. It
has a 60 KB embedded flash and a 4 KB embedded RAM. A flash sector is 512 bytes. For more details
refer to the EVK Hardware Description Application Note, AN2731/D and the HCS08 Micro controllers
Data Sheet, MC9S0GB60/GT60.
4.2 MC13192 Processor
The Freescale MC13192 RF transceiver is a small radio that operates in the 2.4GHz ISM band. It has a
Serial Peripheral Interface (SPI) interface for communication with the MCU. For more details about the
MC13192 see the MC13192 Transceiver Data Sheet, MC13192DS/D.