User`s guide

Configure XBee radio settings

2. From the list of System Information links, click Mesh Network. The

Mesh Network page is displayed. It shows several settings for the

gateway, followed by the Network View of the Mesh Devices. In the

Type column, the ZigBee module in the gateway is listed as the

coordinator, and any XBee adapter/router/sensor products discovered

are listed as routers.

View and change XBee radio settings as needed

1. Select Configuration > Mesh Network from the menu.

The Mesh Network Configuration page is displayed. It shows several

settings for the gateway, followed by the Network View of the Mesh

Devices. In the Type column, the ZigBee module in the gateway is

listed as the coordinator. Your adapter/router/sensor product is listed

as a router. To refresh the view, click the Refresh button.