User`s guide

Configure XBee radio settings
61
There are several configurable radio settings in XBee Adapter, Router, and
Sensor products, including the PAN ID, the node identifier or name for the
unit, and timeout and scanning settings. This chapter shows how to
configure your XBee product through the gateway’s web interface.
Configuration with a ConnectPort X gateway
Access the gateway’s web interface
Once the core Drop-in Network components are connected and powered
on, open the web interface of the ConnectPort X gateway.
1. On the PC, open a web browser such as Internet Explorer.
2. In the browser’s address bar, enter 192.168.1.1 which is the default IP
address for the gateway.
3. The home page of the gateway’s web interface is displayed.
Chapter 12
Configure XBee radio settings