User`s guide

XBee USB Adapter
47
LEDs and buttons
There is one LED and one button on the end of the adapter opposite the
USB connector:
Associate/Power LED;
blinking green=associated
Assoc
Reset
Reset button
Associate/
Power LED:
Indicates power and the adapter’s ZigBee network association status:
LED status Network association
On, solid green Powered and not associated.
On, blinking green Powered and associated.
Reset button: Performs a reset.
Use a small non-conducive tool with a blunt end to press gently and hold
down button. Consecutive button presses must occur within 800 ms of
each other to perform the desired action.