User`s guide

XBee Sensor Adapter
44
LEDs and buttons
Assc
Ident
Power
blinking green
solid green
Power LED: Indicates that power is on. Illuminated only when adapter is connected to
external power only, not when powered by batteries. Not available in
lithium-battery models.
Assc LED: Indicates the adapter’s ZigBee network association status:
LED status Network association
On, solid green Not associated
On, blinking green Successfully joined
Reset button: Recessed button on underside of the adapter. Performs equivalent of a
power-cycle. Use a small non-conducive tool with a blunt end to press
gently and hold down button.
Ident button: Recessed button on power end of the adapter between Assc and Power
LEDs. Performs multiple functions for commissioning the adapter in a
ZigBee network. Consecutive button presses must occur within 800 ms of
each other to perform the desired action.