User`s guide

XBee Digital I/O Adapter
32
DIP switches
The XBee Digital I/O Adapter has several DIP switches on the underside of
the unit, with these settings:
Note:
• Switches 1 and 2 should not be on at the same time as increased
parasitic battery drain will result.
• Pullup use is not recommended when running from battery power,
owing to the constant drain on the batteries.
DIP Switch Switch settings
1 Enables and disables direct battery pack voltage
output.
On=battery power out
Off=no battery power out
2 Enables and disables +12V power out.
On=+12V power out
Off=no +12V power out
3 Turns on 10K pullup on terminal 1 to 3VDC.
4 Turns on 10K pullup on terminal 2 to 3VDC.