User`s guide

XBee Analog I/O Adapter

Bitmask for digital sampling

In this bitmask, bit 0 is the lease significant bit.

The measurement associated with AD0 is from terminal line 1, AD1 is from

terminal line 2, etc.

Note: If any of these AT commands is set to values 3, 4, or 5, the bitmask

will show them as enabled. If they are set to values 0, 1, or 2, the bitmask

will show them as disabled.

Bit mask for analog sampling

In this bitmask, bit 0 is the lease significant bit. The measurement

associated with AD0 is from terminal line 1, AD1 is from terminal line 2, etc.

Typically all the lines except Supply Voltage would be enabled.

Bit Matching I/O line

0AD0/DIO0

1AD1/DIO1

2AD2/DIO2

3AD3/DIO3

4 DIO4

5Assoc/DIO5

6 DIO6

7 DIO7

8 DIO8

9Not Used

10 DIO10

11 DIO11

12 DIO12

13 DIO13

14 Not Used

15 Not Used

Bit Matching I/O line

0 AD0/DIO0 (pin 20)

1 AD1/DIO1 (pin 19)

2 AD2/DIO2 (pin 18)

3 D3/DIO3 (pin 17)

7 Supply Voltage