User`s guide

XBee Analog I/O Adapter
20
Pinouts
Using the orientation in the previous figure, from right to left, the pinouts
are:
DIP switches
The XBee Analog I/O Adapter has several DIP switches on the underside
of the unit, with these settings:
Note: Switches 1 and 2 should not be on at the same time as increased
parasitic battery drain will result.
Pin
Analog Mode
Ten Volt Current Loop Differential
1 0-10 Volt 4-20 mA Terminal Pair 1 positive
2 0-10 Volt 4-20 mA Terminal Pair 1 negative
3 0-10 Volt 4-20 mA Terminal Pair 2 positive
4 0-10 Volt 4-20 mA Terminal Pair 2 negative
5 Ground Ground Ground
+12VDC 50mA max
switched power out
+12VDC 50mA max
switched power out
+12VDC 50mA max
switched power out
DIP Switch Switch settings
1 Enables and disables direct battery pack voltage
output.
On=battery power out
Off=no battery power out
2 Enables and disables +12V power out.
On=+12V power out
Off=no +12V power out
3 Not used
4 Not used