User`s guide

Configure Digi devices
69
Deploy the Digi Connect ES 4/8 SB with Switch
To deploy the Digi Connect ES 4/8 SB with Switch after network configuration:
1 Install the Digi Connect ES 4/8 SB with Switch in the desired location.
2 Connect the Digi Connect ES 4/8 SB with Switch to the main/business Ethernet network
through the Ethernet Uplink connection, using a straight-through Ethernet cable.
3 Connect the network devices to the Ethernet Switch ports, using straight-through Ethernet
cables.
4 Connect the serial devices to the serial ports.
5 Power on the Digi Connect ES 4/8 SB with Switch and all connected devices.