User`s guide

Troubleshooting
189
LED/button Color and
Light Pattern
Description
Power LED Solid Green Power is applied.
Status LED Green Blinks during product initialization and factory reset, using the light patterns below.
This LED should never blink during normal operation. If it blinks constantly, contact
Digi Technical Support.
1-1-1 blinking green Firmware is initializing.
1-5-1 blinking green Device configuration has been restored to its factory defaults.
Other blinking green Contact Digi Technical Support.
Solid green Device is powered on and ready for operation.
Wi-Fi Link Solid yellow Wi-Fi link is up.
Wi-Fi Activity Blinking green Wi-Fi traffic is on the link.
Reset button N/A Performs equivalent of a power-cycle.
Signal Strength
LEDs
Ethernet Link LED Solid green Ethernet link is up. Will light solid green when an active LAN connection is plugged
into the Ethernet port.
Ethernet Activity
LED
Blinking yellow Blinks when active traffic is on the LAN connection.
Serial TX Yellow On when data is being transmitted out of a serial port.
Serial RX Green On when data is being received on a serial port.