User`s guide

Introduction
15
Quick reference for configuring features
This guide primarily focuses on configuring, monitoring, and administering Digi devices from the
web interface. This table provides a quick reference for configuring features and performing
device tasks, and where to find the features and settings in the web interface and this guide. Click
the page number in the Page column to jump to instructions on configuring or using the feature.
Some features are configurable from the command line interface only. In those cases, the
commands that configure the feature are noted. The command descriptions are in the Digi Connect
Family Command Reference.
Feature/task Path to feature in the web interface See page
Administration/Configuration management:
File management: uploading and
downloading files, such as applet
files, and custom splash screens.
Administration > File Management
See also the Digi Connect Family Customization and Integration Guide for
information on uploading and downloading files used to customized a Digi
device’s look-and-feel.
151
Python program file
management.
Applications > Python 116
Backup/restore a configuration
from a TFTP server on the
network
Administration > Backup/Restore 155
Update firmware
Administration > Update Firmware 155
Reset configuration to factory
defaults
Administration > Factory Default Settings 156
System information, including
device identifiers and statistics
Administration > System Information 159
Reboot the Digi device
Administration > Reboot 159
Alarms Configuration > Alarms 95
Autoconnection: automatically
connect a user to a server or network
device
Configuration > Serial Ports > port > Profile Settings > TCP Sockets >
Automatically establish TCP connections
86