User`s guide

Configure Digi devices
109
Manually configure a Digi device to connect to the iDigi Platform
To use iDigi Platform as a device manager for your Digi device, you need to manually configure
the Digi device to connect to iDigi Platform.
1 Open the web interface for the Digi device and go to
Configuration > Remote Management.
2 On the Remote Management settings page, enter the URL of the iDigi Platform
connectivity server (for example, sd1-na.idigi.com) in the Server Address field under
Client-Initiated Management Connection. You can find this URL from the iDigi Platform
user portal screen header near the top of the screen under About > Log Off.
3 Click the check box labeled
Automatically reconnect to the server after being disconnected.
4 Click Apply.
Managing alarms through a remote management server
All alarms can be sent to a remote management server for display and management from that
interface. See "Alarms" on page 95.