User`s guide

Configure Digi devices
103
Number Description Location
Digi Login Traps
MIB
Indicates when users attempt to log into the device, and whether the
attempt was successful.
http://ftp1.digi.com/support/utilities/
Digi Part number 40002339_x.mib
Digi Structures of
Management (SMI)
MIB
Data structures for managing hosts and gateways on a network. http://ftp1.digi.com/support/utilities/
Digi Part number 40002195_x.mib
Digi Connect
Mobile Traps MIB
A Digi enterprise MIB for sending alarms as SNMP traps.for mobile
devices.
http://ftp1.digi.com/support/utilities/
Digi Part number 40002594_x.mib
Digi Connectware
Notifications MIB
This MIB may be required by some SNMP import facilities, as other
MIBs may refer to it.
http://ftp1.digi.com/support/utilities/
Digi Part number 40002514_x.mib
Supported SNMP traps
SNMP traps can be enabled or disabled. Supported traps include:
Authentication failure
Login
Cold start
Link up
Alarms can be issued in the form of SNMP traps.
A large set of MIBs define these various trap types (unsolicited status
message from the device).
All products support MIBs for serial alarms / login traps/RFC 1215.
Products with the geofencing/GPS feature support MIBs for
geofencing.
Products with mobile/cellular capability support MIBs for mobile
alarms.
In the web interface, traps are enabled/
disabled at Configuration > System >
SNMP >
Enable Simple Network
Management Protocol (SNMP) traps
Alarms are configured at
Configuration > Alarms >
Alarm Conditions > Alarm n >
Alarm Destinations > Send SNMP
trap to following destination when
alarm occurs