User guide

set config
Chapter 2 Command Descriptions 97
set config
Device support This command is supported in all devices.
Purpose Configures or displays network settings. These settings are stored in the
network parameters configuration table.
The “optimize={latency|throughput}” option can be used to optimize your
network for better Ethernet/IP performance.
Required
permissions
The root user can configure network parameters. Normal users can display
network parameters.
Syntax Configure network parameters
set config [bootfile=file]
[boothost=host ipaddr]
[circuitbreaker=reset]
[dhcp={on|off}]
[dns1=ip addr]
[dns2=ip addr]
[dns3=ip addr]
[domain=domain]
[gateway=ip addr]
[hostname=name]
[ip=ip addr]
[nameserv=ip addr]
[optimize={latency|throughput}]
[ping-arp={on|off}]
[rarp={on|off}
[realport=tcp port]
[redirect={listen|ignore}]
[rpkeepalives={on|off}]
[save={on|off}]
[securerealport=tcp port]
[sockets=socket num]
[submask=mask]
[tbreak={std|any|none}]
[tftpboot={yes|no|smart}]
Display network parameters
set config