User guide

power
74 Chapter 2 Command Descriptions
Control a device with a device range
This example turns on the power to the device on the unit 2 connected to
the outlet 3.
#> power action=on range=2 outlet=3
Control a device with an ID
In this example, the power to all outlets affiliated with a device named
“Router” will be rebooted. This command will only work if the outlets are all
currently on.
#> power action=reboot id=Router
See also • "set powerunit" on page 175.
• The Digi One and PortServer TS Family User’s Guide’s chapter on Digi
Remote Power Manager (Digi RPM).