User guide

power
Chapter 2 Command Descriptions 73
group=group#
Performs the specified action on an outlet with the specified group
number.
Examples Display outlet status
This command displays the status of the outlets, including whether they are
on or off, their IDs, and the group number.
#> power action=show range=2 outlets=3
Or:
#> power range=2 outlet=3
Display power unit status
This example displays the status a power controller that is connected to a
Digi PortServer TS device but not fully configured yet. The items to be
displayed include:
• Remote Power Control Unit ID (or which port it is on)
• Average Power
• Apparent Power
• True RMS Voltage
• True RMS Current
• Maximum Current Detected
• Internal Temperature
• Outlet Circuit Breaker Status
• Alarm Threshold
#> power action=show
unit : 1
status : NOT CONFIGURED
unit : 2
type : digi_rpm
model : RPM10 ( v1.0.0 )
size : 10
Circuit Breaker status - : Good
Voltage V : 121.0
RMS Current Amps: 0.0
Max Current Detected Amps: 0.0
Alarm Threshold Amps: 99.0
Temperature C : 27.0
Control power to a port
This example turns off the power to all outlets affiliated with group 3.
#> power group=3 action=off
Clear the maximum current detected
This example clears the maximum current detected variable for the power
unit on port 8.
#> power action=clear range=8