User guide

info
64 Chapter 2 Command Descriptions
info
Device support This command is supported in all devices.
Purpose Displays or clears statistics, including protocol, interface, IA, serial, and
UDP over serial. The statistics displayed are those gathered since the
statistics tables were last cleared.
Required
permissions
Normal users can view statistics tables. Root privileges are required to
clear them.
Syntax Clear statistics
info clear
{protocol|network|serial:port|ia:protocol|sou:range}
Display statistics
info {protocol|{network|serial:port|ia:protocol|sou:range}
Options info clear
Clears all the statistics tables. This command resets all the counts in the
statistics tables to zero.
info {protocol | network | serial:port | ia:protocol | sou:range}
Displays one or more statistics tables, depending on the option specified.
The syntax options and results are:
.
Syntax Result Example
info clear All statistics are cleared. info clear
info protocol
where protocol is one of the
following: wlan, frame, modbus,
ip, icmp, ethernet tcp, or udp.
wlan, frame, modbus, ip, icmp,
tcp, or udp tables are
displayed.
info ip
info network All network interface statistics
are displayed.
info network
info serial:port
where port the port number.
Port statistics are displayed.
For descriptions of these
statistics, see About the port
statistics displayed by "info
serial" on page 65.
info serial:1
info ia:protocol
where protocol is one of the
following: Compoway/F,
df1fullduplex, df1halfduplex,
fins, hostlink, modbus,
userdefined.
IA protocol statistics are
displayed.
info ia:modbus
info sou:range
where range is the port or ports.
Serial over UDP statistics
associated with a serial port
are displayed.
info sou:2