User guide

who
Chapter 2 Command Descriptions 261
who
Device support This command is supported in all devices.
Purpose Displays a list of current users of the Digi device. For each user,
information displayed includes from where the user is connected from
(“Connected from”), the services to which they are connected
(“Connected to”), and the number of connections open.
Required
permissions
Anyone can use this command.
Syntax who [mode={name|numeric}] [range=tty-tty]
Options mode={name|numeric}
How to display the current users in the “Connected from” field. This
setting has no effect for users logged in via serial ports.
name
Displays the “Connected from” field as a host name, for example
“fred.company.com.”
numeric
Displays the “Connected from” field as a host IP address, for example,
“192.168.4.17.”
range=tty-tty
Either a tty connection or a range of connections identified by TTY
connection number.
Examples Display a list of all current users
#> who
Display a range of users
#> who range=5-10
See also • "close" on page 54.
• "connect" on page 56.
• "exit" on page 62.
• "kill" on page 66.
• "mode" on page 67.
• "quit" on page 75.
• "reconnect" on page 76.
• "rlogin" on page 83.
• "send" on page 85.
• "set user" on page 230. The “telnetesc=character” option sets a Telnet
escape character sequence.
• "status" on page 254.