User guide

set user
240 Chapter 2 Command Descriptions
passpacket=filter
The name of a filter designed to allow packets meeting filter criteria to
pass through device server serial ports on PPP connections.
password={on|off}
Specifies whether a device server password is required of this user.
on
A device server password is required of this user.
off
A password is not required of this user.
The default is "on."
ports=ports
A port or range of ports that this user can access.
pppauth={none|pap|chap|both}
Determines whether authentication is required for inbound PPP
connections and, if so, what kind.
none
The remote user does not require PPP authentication.
chap
CHAP authentication is required.
pap
PAP authentication is required.
both
Both CHAP and PAP authentication are required.
The default is "none."
CHAP authentication works between two Digi devices. CHAP will be
negotiated to PAP for all other connections.
protocompress={on|off}
Specifies whether the device server attempts to negotiate protocol
compression on PPP connections.
on
The device server attempts to negotiate protocol compression on PPP
connections.
off
The device server will not negotiate protocol compression.
The default is "on."
protocol=ppp
Specifies that this is a PPP user. This setting is required for all PPP
users.