User guide

set user
Chapter 2 Command Descriptions 239
netservice={on|off}
Specifies whether PPP connections are allowed.
on
Allows PPP connections for the user.
off
Allows no PPP connections for the user.
To configure inbound PPP users, you must specify "netservice=on."
network
Displays network-related options associated with the user specified on
the "name" option.
newname=string
A new name for a previously defined user.
outgoing={on|off}
Specifies whether the user can initiate outgoing serial connections.
on
The user can initiate outgoing serial connections. For outbound users,
"outgoing=on" is required.
off
The user cannot initiate outgoing connections
p1, p2 ...=script parm
Letters and numbers that can be used in the variable options of login or
dialer scripts. "p1" is typically used to supply user names and "p2"
passwords.
papid=id
A character string that identifies the outbound PPP user using PAP
authentication. This option is equivalent to a user name or login name.
The string must be 16 or fewer characters and must be recognized by the
peer.
pappasswd=password
A character string that authenticates the outbound PPP user using PAP
authentication. This is equivalent to a password. The string must be 16
or fewer characters and must be recognized by the peer.
passive={on|off}
Specifies whether the device server waits for the remote system to begin
PPP negotiations, or can initiate PPP negotiations on its own.
on
The device server waits for the remote system to begin PPP
negotiations.
off
The device server may initiate PPP negotiations.
The default is "off."
Do not set both sides of a PPP connection to "passive=on."