User guide

set user
Chapter 2 Command Descriptions 235
compression={vj|none}
Specifies whether compression is used on PPP connections.
vj
Van Jacobsen header compression is used on PPP connections.
none
Header compression is not used on PPP connections.
The default is "vj."
connectesc={off|esc char}
The escape character for users using the connect command. The default
escape character is Ctrl [(Control key and left bracket).
defaultaccess=service
Restricts the service accessible to the user. The options for service are:
commandline
The device server command line is displayed to the user.
menu
A menu is displayed to the user. If you specify this option, you must
also specify a menu number on the "menu" option.
autoconnect
The device server automatically connects the user to the destination
specified on the "autohost" option.
netservice
Starts Peer to Peer Protocol (PPP) services. Use this value for PPP
users.
outgoing
This user is limited to outgoing connections.
The default is "commandline."
device=device name
The name of a device or a device pool, defined with the "set device"
command, used for outbound PPP connections.
dialout={on|off}
Specifies whether an outbound PPP connection is started.
on
Starts an outbound PPP connection. A dialer script requires this option
to be on to initiate outbound connections.
off
Disconnects an outbound PPP connection.
The default is "off."