User guide

set user
230 Chapter 2 Command Descriptions
set user
Device support This command is supported in all devices. However, the number of entries
that can be stored in the user table varies by device:
• The user table for PortServer TS 8/16 Family devices holds up to 64
entries. To accommodate additional users, PortServer TS 8/16 Family
devices can use a RADIUS server.
• The user table for Digi One Family and PortServer TS Family devices
holds up to 9 users.
Purpose Configures and displays user options. The "set user" command configures
a range of options associated with users, such as whether the user
automatically connects to a host or is required to supply a password.
"set user" also displays configuration attributes stored in the user table,
such as whether a user must supply a password.
The user option SSH version 2 encryption for secure communication
(SSH2) is supported on the server version only, and not on the client
version.
Required
permissions
The root user can configure user options. Normal users can display user
options.
Syntax Configure user attributes
set user [accesstime=time]
[addrcompress={on|off}]
[asyncmap=map]
[autoconnect={on|off}]
[autohost=ip addr]
[autoport=tcp port]
[autoservice={default|telnet|rlogin|raw}]
[bringup=filter]
[chapid=id]
[chapkey=key]
[commandline={on|off}]
[compression={vj|none}]
[connectesc={off|esc char}]
[defaultaccess=service]
[device=device name]
[dialout={on|off}]
[downdly=seconds]
[flushstchar={default|on|off}]
[idletimeout=time]
[ipaddr=ip addr]
[ipmask=mask]
[keepalive={on|off}
[keepup=filter]
[killescchar=character]
[loadkey=host:key]
[localbusydly=seconds]
[localipaddr={0.0.0.0|ip addr|unnumbered}]
[loginscript=script]
[logpacket=filter]