User guide

set snmp
202 Chapter 2 Command Descriptions
contact=administrator
A text string that identifies a contact person, usually an administrator. If
there are spaces in the text, the entry must be surrounded by quotation
marks.
curr_thresh_exc_trap={on|off}
Determines whether an SNMP trap is sent to the SNMP manager when
the electrical current threshold on a power control device is exceeded.
on
The agent sends a trap when the threshold is exceeded.
off
A trap is not sent when the threshold is exceeded.
The default is “off.”
get_request=community
The password required to read device server SNMP managed objects.
The default is “public”.
link_up_trap={on|off}
Determines whether an SNMP trap is sent to the SNMP manager when
a network link comes up.
on
The agent sends a trap when the link comes up.
off
A trap is not sent when the link comes up.
The default is "off."
location=location string
A text string that describes device server’s location. If there are spaces
in the text, the string must be surrounded by quotation marks.
name=name string
A text string that identifies device server. If there are spaces in the text,
the string must be surrounded by quotation marks.
login_trap={on|off}
Determines whether the device server sends a trap each time someone
attempts to log into the system.
on
Send a trap at each attempt to log in.
off
Do not send a trap each time someone attempts to log in.
The default is "off."