User guide

set service
196 Chapter 2 Command Descriptions
set service
Device support This command is supported in all devices.
Purpose Use the "set service" command to
• Configure, or associate, names with TCP and UDP service ports for use
in filters.
• Display entries in the service table.
• Remove entries from the service table.
Required
permissions
The root user can configure or remove service table entries. Normal users
can display service table entries.
Syntax Configure/associate names with TCP and UDP service ports
set service name=name
port={udp:port|tcp:port}
Display entries in service table
set service [range=range]
Remove entries from the service table
While this command variation removes service table entries, the “remove”
command is also available.
set service [rmservice=name|rmservice=on]
Options name=name
The name to assign the service.
port={udp:port|tcp:port}
The TCP or UDP port number for the service.
range=range
A range of entries in the service table, which is used to identify entries to
display or delete.
{rmservice=name|rmservice=on}
Removes a service from the service table.
name
The name of a service to be removed from the service table.
on
Remove the service or services from the service table identified on the
"range" option.