User guide

set ports
Chapter 2 Command Descriptions 169
set ports
Device support This command is supported in all devices.
Purpose Configures or displays a port’s operating parameters.
Required
permissions
The root user can configure port parameters. Normal users can display
port parameters.
Syntax Configure operating parameters of a port
set ports [auto={on|off}]
[autoservice={default|raw|rlogin|telnet}]
[bin={on|off}]
[dest={ip adr|none]
[dev=device]
[dport={tcp port|none}]
[flushstchar={default|on |off}]
[group={none|group}]
[id={id name|none}]
[idletime=0-60000]
[keepalive={on|off}]
[nlines=0-10]
[p[1-9]=script param]
[range=range]
[scriptname=name]
[sess=sessions]
[show={autoconnect|id|script}]
[termtype=type]
[uid={id|none}]
Display operating parameters of a port
set ports [range=range]
[show={script|id|autoconnect}]
Options auto={on|off}
Determines whether users of the port will bypass device server’s login
and password sequence and be automatically connected to the
destination defined on the "dest" option.
on
Users are automatically connected to a destination.
off
Users are not automatically connected to a destination.
The default is "off."