User guide

set netlogins
164 Chapter 2 Command Descriptions
set netlogins
Device support This command is supported on the PortServer TS 8/16 Family devices
only.
Purpose Use the "set netlogins" command to:
• Configure the sequence of events that occur when a user logs into a
server over the network (netlogin).
• Display current netlogin settings.
Required
permissions
The root user can configure netlogins. Normal users can display netlogin
settings.
Syntax Configure netlogin
set netlogins [cmdprompt=string]
[login={on|off}]
[logprompt=string]
[passprompt=string]
[passwd={on|off}]
[premessage=string]
[rootprompt=string]
[verbose={on|off}]
[write={on|off}]
Display current netlogin settings
set netlogins
Options cmdprompt=string
The prompt displayed to a regular user who has logged in. The maximum
length is 31 characters. Enclose this string in quotation marks if it
includes spaces. The default is digi> for normal users, and #> for root
users.
login={on|off}
Specifies whether a user must log into the port.
on
A user must log into the port.
off
A user is not required to log into the port.
The default is “on” for inbound device types. This option is disabled when
the port is configured as an auto port. See "set ports" on page 169 for
more information.
logprompt=string
The login prompt displayed. The maximum length is 10 characters.
Enclose this string in quotation marks if it includes spaces. The default is
login: