User guide

set logins
Chapter 2 Command Descriptions 153
passwd={on|off}
Specifies whether users are required to supply a password to access the
ports specified by the "range" option.
on
Users are required to supply a password to access the ports specified
by the "range" option.
off
Users do not supply a password.
The default is “on.” This option is disabled when the port is configured as
an auto port (see "set ports" on page 169).
passprompt=string
The password prompt displayed. The maximum length is 10 characters.
Enclose this string in quotation marks if it includes spaces or colons. The
default is “password:”.
premessage=string
A message string that precedes any action, such as a login prompt or
autoconnect. The string can contain escape characters. The maximum
length after string processing is 63 characters. The default is no
message.
range=range
The range of ports addressed by this "set logins" command. When the
"set logins" command is issued from a Telnet session, "range" is required
in order to identify the port to which it applies. When "set logins" is issued
from an attached terminal, the command applies to the port which the
terminal is attached, unless the "range" option is used to specify another
port.
rootprompt=string (PortServer TS 8/16 Family only)
The prompt displayed to the root user who has logged in. The maximum
length is 31 characters. Enclose this string in quotation marks if it
includes spaces or colons. The default is “#>”.
verbose={on|off}
Specifies whether the device server displays connection status
messages to users before the login prompt.
on
The device server displays connection status messages before the
login prompt.
off
The device server does not display connection status messages
before the login prompt.
The default is "off."