User guide

set device
104 Chapter 2 Command Descriptions
set device
Device support This command is supported in PortServer TS Family devices only.
Purpose Configures devices used for outbound connections to use dialer scripts and
chat table entries; configures a different baud rate (line speed) for modems
and other devices used for outgoing connections than the rate defined on
the “set line” command; or displays the contents of the device table.
Required
permissions
The root user can configure devices. Normal users can display device table
entries.
Syntax Configure devices
set device [baud={no|rate}]
[chat={no|index num|chat name}]
[dialer={no|index num|script name}]
name=name ports=range
[newname=newname]
[p{1-9}]
[save={on|off}]
[show=on]
Display device table information
set device [{range=range|name=name}]
Options baud={no|rate}
Specifies the baud rate for the device.
no
The baud rate specified on the "set line" command will be used.
rate
The baud rate (line speed) when this device is used. This option
overrides the baud rate for this device defined on the “set line”
command. The range is 300 to 115,200 bps.
The default is "no."
chat={no|index num|chat name}
Specifies whether a chat table entry is associated with this device.
no
A chat table entry is not associated with this device.
index num
A chat table entry (index number) associated with this device.
chat name
The name of a chat table entry.
The default is “no.”