User`s guide

73
Configuration – Network > Interfaces > DSL
The Configuration – Network > Interfaces > DSL page has the following options:
• PVC Configuration
• DSL Network Settings
• PVC Traffic Shaping
• Advanced
Router models incorporating a DSL broadband interface will include a configuration page
having the title shown above. By default, the configuration in this section will be suitable for
the majority of ADSL service providers in the UK. However, advanced users or users
outside of the U.K. may wish or need to adjust some of the parameters.
Enable DSL
This checkbox gives the facility to enable or disable the use of DSL/ADSL functionality on
the router.
Configure PVC
Select the required PVC instance from the drop-down selection box. Subsequent settings
will apply to the selected instance (see below).
Entity
Instance
Parameter
Values
Equivalent Web Parameter
eth 0 vdsl OFF/ON Link VDSL interface with Ethernet n
PVC Configuration
Configuration – Network > Interfaces > DSL> PVC Configuration
The PVC (Permanent virtual circuit) parameters are described here.
Enable this PVC
Tick the box to enable PVC settings
Encapsulation
This parameter is used to select the method of encapsulation to be used when
transporting data over this APVC. The appropriate value can be selected from a drop list
which includes the following options:
Option
Description
PPPoA VC-Mux RFC 2364 VC-multiplexed PPP over AAL5
PPPoA LLC RFC 2364 LLC encapsulated PPP over AAL5
PPPoE VC-Mux RFC 2516 VC-multiplexed PPP over Ethernet
PPPoE LLC
RFC 2516 LLC encapsulated PPP over
Ethernet
Bridged Ethernet VC-Mux RFC 2684 VC-multiplexed bridged Ethernet
Bridged Ethernet LLC
RFC 2684 LLC encapsulated bridged
Ethernet
Routed IP VC-Mux
RFC 1483 VC multiplexing routed IP over