User`s guide

62
an NAI password
Once these details have been obtained, it is possible to provision the CDMA module by
inserting those details into the ‘Automatic Provisioning’ section of this web page and clicking
on the Start button.
See
Quick Note 25 – “CDMA Provisioning on a Digi TransPort Router” for
example configuration.
Automatic Provisioning
If required, enter the MSL/PTN/MSID parameters before clicking Start
MSL:
Master subsidy lock (MSL) code. Obtain this from the mobile operator.
PTN:
Personal Telephone Number. Obtain this from the mobile operator.
MSID:
Mobile Station Identifier. Obtain this from the mobile operator.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
provision 0 string1
No data input
required
MSL
provision 0 String2
No data input
required
PTN
provision 0 String3
No data input
required
MSID
Manual Provisioning
Manual provisioning should only be attempted by experienced technical personnel who have
obtained all the required information from the mobile operator. Technical personnel with
previous provisioning experience should not require these parameters explaining.
MSL:
Master subsidy lock (MSL) code. Obtain this from the mobile operator.
MDN:
Personal Telephone Number. Obtain this from the mobile operator.
MIN/MSID:
Mobile Station Identifier. Obtain this from the mobile operator.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
provision 0 String4 Free text field MSL
provision 0 String5 Free text field PTN
provision 0 String6 Free text field MIN/MSID
Mobile IP settings
Configuration – Network > Interfaces > Mobile> Mobile IP settings