User`s guide

49
IP Address
The destination IP address. This parameter is optional. If configured, only packets destined
for this IP address will have VLAN tagging applied.
Mask
The destination IP subnet mask. This parameter is optional. If configured, only packets
destined for this IP subnet mask will have VLAN tagging applied.
Source IP Address
The source IP address. This parameter is optional. If configured, only packets from this IP
address will have VLAN tagging applied.
Source Mask
The source IP subnet mask. This parameter is optional. If configured, only packets from this
IP subnet mask will have VLAN tagging applied.
Related CLI Commands
Entity Instance Parameter Values
Equivalent Web
Parameter
eth n vlan on, off
Enable VLAN support on
Ethernet interfaces
vlan n vlanid 0 - 4095 VLAN ID
vlan n ethctx Integer Ethernet Interface
vlan n ipaddr IP Address IP Address
vlan n mask IP Mask Mask
vlan n srcipaddr IP Addess Source IP Address
vlan n srcmask IP Mask Source Mask
Wi-Fi
Configuration – Network> Interfaces> Wi-Fi
This is the section of the web interface that contains the configuration options required in
order to configure and enable the Wi-Fi features. The Configuration - Network >
Interfaces > Wi-Fi page has the following options:
• Global Wi-Fi settings
• Wi-Fi n
• Rogue Scan
Global Wi-Fi settings
Configuration – Network> Interfaces> Wi-Fi> Global Wi-Fi settings