User`s guide

465
When used in the format:
prof nn
the PROF command loads the stored profile specified by “nn”.
RESET Send Reset Packet
RESET is used to issue a reset for the current call to the network. It does NOT clear the call
but it does return the network level interface to a known state by re-initialising all Level 3
network control variables. All data in transit will be lost.
RPAR? Read Remote X.3 Parameters
RPAR? lists the current X.3 parameter settings for the remote system.
RSET Set Remote X.3 Parameters
RSET is used to set one or more X.3 parameters for the remote system. It is entered in the
format:
RSET par #:value[,par #:value[,par #:value ...]]
SET Set Local X.3 Parameters
SET is used to set one or more of the local X.3 parameters for the duration of the current
session. The format of the command is:
SET par #:value[,par #:value[,par #:value ...]]
STAT Display Channel Status
STAT displays the current status for each logical channel indicating whether it is free or
engaged. For example:
stat
PAD STATE
1 ENGAGED
2 FREE
3 FREE
4 FREE