User`s guide

464
PROF &nn
where “nn” is the number of the User PAD profile to be stored, e.g. 03. Alternatively, you
may use the web interface to edit the parameters directly (Configuration - Network >
Legacy Protocols > X.25 > PADs n-n > PAD n > PAD Settings).
The pre-defined profiles (50, 51, 90, 91), cannot be overwritten and are permanently
configured as shown in the following table:
Parameter
Profile
50
51
90
91
1 1 0 1 0
2 0 0 1 0
3 0 0 126 0
4 5 5 0 20
5 0 3 1 0
6 5 5 1 0
7 0 8 2 2
8 0 0 0 0
9 0 0 0 0
10 0 0 0 0
11 15 15 15 15
12 0 3 1 0
13 0 0 0 0
14 0 0 0 0
15 0 0 0 0
16 8 8 127 127
17 24 24 24 24
18 18 18 18 18
19 2 2 1 1
20 64 64 0 0
21 0 0 0 0
22 0 0 0 0
Stored X.25 PAD profiles are held in non-volatile memory and will not be lost when the unit
is switched off.