User`s guide

448
Note:
When you type the password it will appear as a series of dots to ensure privacy.
Once you have entered these, initiate a connection to your unit by clicking the Dial button.
During the dialling and connection process, you may see a series of status dialog boxes and,
if the connection is successful, the final dialog box will indicate that the PPP login has been
authenticated.
After a short delay, this dialog will minimise to a “linked computers” icon in the Windows
taskbar:
You should now be ready to access the built-in web pages using your Web browser. The
default “web address” for the unit is http://1.2.3.4. By default, this is also mapped to the
system IP hostname digi.router.
You will need a valid username and password to access the web interface. Once again, the
default settings are username and password respectively. If these values do not allow
access, you should contact your system administrator.