User`s guide

445
If the connection is being created for direct local access using a COM port, you should set
the phone number to 123. This number will be intercepted by the unit and recognized as an
attempt to connect locally.
If the connection is being created for remote access, enter the correct ISDN telephone
number (including the area code) for the remote unit.
When you have done this click Next >. The final dialog screen will confirm that the
connection has been created and includes a check box to allow you to create a shortcut on
your desktop if necessary. Click on Finish to complete the task.
Configuring the New DUN Connection
The new DUN connection that you have just created may now be used to connect to the unit
but before you do this, you will need to check some of the configuration properties.
1. Click on the Start button and select Connect To > My Digi Router (substituting the
connection name you chose).