User`s guide

442
Click on the OK button if you are satisfied with the installation.
Note:
During the installation you may receive a warning that the driver is not digitally signed.
Click on Continue Installation to install the driver.
Creating A New Dial-Up Network Connection
You now need to create a new DUN connection through which you can access your unit.
If you are planning to connect the unit directly to your PC for configuration purposes,
connect it to the appropriate COM port now using a suitable serial cable.
If you wish to configure a remote unit, make sure it is connected to a suitable ISDN line and
make a note of the ISDN number.
1. From the Windows Start menu, select All Programs > Accessories > Communications >
New Connection Wizard. You will be presented with the New Connection Wizard introduction
screen. Click on Next > to proceed to the Network Connection Type dialog: