User`s guide

426
Save configuration
Administration – Save configuration
Once you have configured the router, your chosen settings must be saved to non-volatile
memory to avoid losing them when the power is removed.
Save current configuration to Config n
This parameter can be used to set the configuration file to which the current configuration
will be saved when the “Save” button is clicked. There are 2 options, profile 0 and profile 1.
The default power up profile is profile 0.
The configuration profile that is used when the router powers up is indicated in the selection
box.
Save all configuration
The “Save All” button saves the router’s entire configuration.
• The current configuration parameters to config.da0 or config.da1 file**
• The ciphered versions of the passwords to the pwds.da0 or pwds.da1 file**
• The Firewall configuration to the fw.txt file
• The serial port configuration to profile 0 of the sregs.dat file
• The PAD parameters on all the PADs to profile 0 of the x3prof file
Related CLI Commands
Parameter
Options
Equivalent Web Parameter
config save Save current configuration to Config n
saveall n/a Save all configuration
** The default power up profile is profile 0. *.da0 = profile 0, *.da1 = profile 1.