User`s guide

406
Interface
Value
Serial 10 1024
Serial 11 2048
Serial 12 4096
To enable the analyser on multiple serial interfaces, add the appropriate values together.
For example, to enable the analyser on serial interfaces 2 and 3, the value should 12 (4 +
8).
The number of Serial interfaces can vary on different depending on which hardware and
software options are available.
Raw Sync Interfaces
Interface
Value
ISDN D 1
ISDN B1 2
ISDN B2 4
Physical Port 0 8
Physical Port 1 16
To enable the analyser on multiple serial interfaces, add the appropriate values together.
For example, to enable the analyser on Physical Ports 0 and 1, the value should 24 (8 +
16).
Trace
Management-Analyser > Trace
This displays the current analyser trace.