User`s guide

404
Entity
Instance
Parameter
Values
Equivalent Web Parameter
separated list
Protocols
ana 0 discipaddfilt
Comma
separated list
Discarded IP Packet Filters / IP
Addresses
eth n ethanon on, off Ethernet Interfaces
eth n ipanon on, off IP Sources
ovpn n ipanon on, off IP Sources
ppp n ipanon on, off IP Sources
ppp n pppanon on, off PPP Interfaces
tun n ipanon on, off GRE IP Sources
tun n tunanon on, off GRE Tunnel Interfaces
Related CLI Commands not available via the Web Interface
Entity
Instance
Parameter
Values
Description
ana 0 fcon on, off Enable serial flow control tracing
ana 0 stopbufs 0 - 255
Stop analyser when number of free
system buffers matches this value
ana 0 stopmsgs 0 - 255
Stop analyser when number of free
system messages matches this value
ana 0 stopflood 0 - 1
Stop analyser when Ethernet flood
protection is activated.
ana 0 lowbufcmd
Command
String
Run this command when the number
of free system buffers match
“lowbuflvel”
ana 0 lowbuflev Integer
Free system buffer threshold used by
“lowbufcmd”.
ana 0 lowmsgcmd
Command
String
Run this command when the number
of free system messages match
“lowmsglvel”
ana 0 lowmsglev Integer
Free system message threshold used
by “lowmsgcmd”.
ana 0 logdrive String
Specifies an alternate file system
drive on which to store the analyser
trace. To use an external USB flash
device, this should be set to “u:”.
If the router has an internal SDIO
flash device, it can be selected with
“s:”.
ana 0 logfile Filename
The file on the alternate drive to
which the analyser trace will be
stored.
ana 0 contfile Filename
The file on the alternate drive to