User`s guide

388
Hits
The number of times an IP packet has been matched against the firewall rule.
Direction
The direction of the IP packets that match the firewall rule.
Src IP Addr
The source IP address of the IP packets that match the firewall rule.
Src Port
The source TCP/UDP port of the IP packets that match the firewall rule.
Dest IP Addr
The destination IP address of the IP packets that match the firewall rule.
Dest Port
The destination TCP/UDP port of the IP packets that match the firewall rule.
Trans. Src IP Addr
If the firewall is configured to modify (e.g. NAT or NAPT) the source IP address of the IP
packets that match the firewall, this defines the new source IP address of the IP packets.
Trans. Src Port
If the firewall is configured to modify (e.g. NAPT) the source TCP/UDP port of the IP packets
that match the firewall, this defines the new source TCP/UDP port of the IP packets.
Trans. Dest IP Addr
If the firewall is configured to modify (e.g. NAT or NAPT) the destination IP address of the IP
packets that match the firewall, this defines the new destination IP address of the IP
packets.
Trans. Dest Port
If the firewall is configured to modify (e.g. NAPT) the destination TCP/UDP port of the IP
packets that match the firewall, this defines the new destination TCP/UDP port of the IP
packets.
Protocol
The IP protocol of the IP packets that match the entry.
Interface
The interface over which the IP packets that match the entry are sent or received.
Related CLI Commands
Command
Options
Equivalent Web Parameter
fwall show Displays the Firewall Stateful Inspection table.
Firewall Trace
Management-Network Status> Firewall Trace
The firewall trace output is appended to when the log keyword is used in the firewall.
Most commonly, the log keyword is used in the last rule in form block log break end to
log a summary of all packets that did not match one of the preceding allow rules.
The log keyword is much more versatile in its usage and what can be logged. For more
information see “log:” in the Firewall Scripts section.
An example output is show below, this is from the commonly used firewall rule
block log break end