User`s guide

377
The status information is presented as a simple table having three or four columns as
described below:
Channel
There are three supported channels; the D-channel, B1 and B2 channels that appear in this
column. Each channel row has an associated status, protocol and (for data channels) action.
The Action column will only appear when the associated channel becomes active.
Status
The status of each channel is shown in this column. The status is either ON or OFF.
Protocol
The protocol in use by the channel is shown in this column. This should be as set up in the
configuration procedure. For D-channels, this will be LAPD. If the associated channel is not
active, this entry will be blank.
Action
When the link becomes active, a button should appear in this column. The text on the
button will be “Drop Link”. Clicking the button will deactivate the channel.
Related CLI Commands
If a PPP instance has been associated with a B-channel, the statistics for that PPP
instance will be available using the normal
pppstat command.PSTN
This section contains the network status information for the PSTN interface.
Link Name
If a description of the interface has been assigned during the configuration, it will appear
here.
This PSTN interface is using PPP n
When configuring the PSTN module, a PPP instance is assigned – the instance number of the
assigned PPP interface appears here.
IP Address
The IP address assigned to the interface is shown here.
Mask
This value is the subnet mask being used by the interface.
DNS Server
The IP address of the DNS server being used by the interface appears here.
Bytes Received
This value is the number of bytes received by the interface.
Bytes Sent
This value is the number of bytes sent by the interface.
LCP Packets Received
This value is the number of Link Control Protocol (LCP) packets received.
LCP Packets Sent
This value is the number of LCP packets sent by the interface.
PAP Packets Received
This value is the number of Password Authentication Protocol (PAP) packets sent by the
interface.
PAP Packets Sent
This value is the number of PAP packets sent by the interface.