User`s guide

366
The number of Ethernet packets that have been received but had an invalid FCS.
Tx Deferred
The Ethernet packets successfully transmitted after being initially deferred.
Long Frames
The number of Ethernet packets that have been received which are too long.
Carrier Sense Error
The number of carrier sense errors that have occurred. These occur when the router
attempts to transmit an Ethernet packet but cannot detect the carrier sense condition on
the Ethernet network.
Rx MAC Errors
The number of internal errors that have occurred when receiving an Ethernet packet.
Tx MAC Errors
The number of internal errors that have occurred when attempting to transmit an Ethernet
packet.
Other Errors
The number of errors that have occurred which are not counted by the other statistics.
Related CLI Commands
Command
Instance
Parameter
Equivalent Web Parameter
eth n status
Displays the current configuration and
status of Ethernet interface n.
ethstat n n/a
Displays the statistics for Ethernet interface
n.
at\mibclr=eth.n.stats n/a n/a
Clears the statistics for Ethernet interface
n.
Wi-Fi
Management-Network Status> Interfaces > Wi-Fi
Module Detected
This indicates that the Wi-Fi hardware has been detected by the router.
Admin Status
The current administrative state of the Wi-Fi interface. It indicates whether there is
sufficient configuration to bring the Wi-Fi interface up. It can be either “Up” or “Down”.
Operational Status
The current operational state of the Wi-Fi interface. It can be either “Up” or “Down”.
Channel Mode
The Wi-Fi channel mode that is being used. The possible values for this parameter are “B/G”
and “A”.
Channel
The Wi-Fi channel that is being used.
Bytes Received
The number of bytes that have been received on the Wi-Fi interface.
Bytes Sent
The number of bytes that have been sent on the Wi-Fi interface.