User`s guide

337
Entity Instance Parameter Values
Equivalent Web
Parameter
snmpuser n name user_dave Username
snmpuser n auth Off,MD5,SHA1
Authentication, None, MD5,
SHA1
snmpuser n authPassword my_password Authentication Password
snmpuser n priv Off,DES,AES Encryption, None, DES, AES
snmpuser n privPassword my_password Encryption Password
SNMP Filters
Configuration – Remote Management > SNMP> SNMP Filters
SNMP filters allow the system administrator to control access to the router MIBs via SNMP.
This functionality is controlled by a table on the web configuration page. This table has three
columns, two main headed columns as described below and a control column containing
button widgets. The table has a capacity of ten entries, snmp filter instances range from 0
to 9.
Username
The username (as configured in the Configuration – Security > Users section) of the
user to whom the access restriction is applied.
OID Prefix
The Object ID prefix for the range of objects in the MIB that the user is not allowed to view.
e.g. 1.3.6.1.2.1.4
Add
This button adds the username and OID prefix into the table.
Delete
This button causes the associated entry in the table to be deleted.
Related CLI Commands
Entity Instance Parameter Values
Equivalent Web
Parameter
snmpfilter n user username Username
snmpfilter n oid Valid SNMP OID OID Prefix
SNMP Traps
Configuration – Remote Management > SNMP> SNMP Traps
SNMP traps are events that are generated when the specified condition is met. The web
page and CLI configuration parameters are described here. The TansPort routers support
two trap servers.
Generate Enterprise traps
When this check box is ticked, the router will generate product-specific traps.
Generate Generic traps