User`s guide

330
that the router should monitor for the FTP “PORT” and ”PASV” commands. These commands
contain information relating to IP addresses and Ports which should be modified during the
NAT process. The NAT modifications may result in different sized packets being generated
that then require that the TCP sequence numbers be modified to allow for the changes.
SNMP Enterprise number
This parameter specifies the value of the OID (Object IDentifier) to be used by SNMP
management tools when accessing the MIB (Management Information Block). This number
must form part of the OID used to access individual items in the MIB as a prefix.
For example: SNMPv2-SMI::enterprises.16378.10001.
SNMP Enterprise Name
This is the name corresponding to the above Enterprise Number.
Only resolve DNS request for domain
Entering a domain name here will restrict DNS requests to the specified domain only.
W-WAN LED to display W-WAN, ISDN/PSTN
On the front panel of the display of models fitted with a W-WAN module, is an LED that may
be used to display the status of the W-WAN module or the status of the PSTN/ISDN
connection. Use the drop-down selection box to choose which. The ISDN/PSTN settings
depend upon which of these two options are available on the router.
Serial LED to display Connection, DTR
On the front panel of the router is an LED dedicated to indicating the status of various
signals on the asynchronous serial line. Use the drop-down selection box to choose which
signal status to display. On modules fitted with W-WAN, this LED has additional
functionality, it can also be used to display the W-WAN signal strength.
CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
config n powerup 0,1
Use Config n when the router
powers up
cmd n anonftp 0,1
Allow anonymous FTP login
0 = Off (default)
1 = On
snmp n ftpnatport 0 - 65535 Additional FTP NAT port
snmp n ent_nb 0 – 65535
SNMP Enterprise Number
Default 16378
cmd n ent_name Free text field SNMP Enterprise Name
cmd n dnsname
Valid Domain
name, e.g.
mydomain.org
Only resolve DNS request for
domain
cmd n gprsled_mode 0,1
W-WAN LED to display W-WAN,
ISDN/PSTN
0 = W-WAN
1 = ISDN/PSTN
cmd n asyled_mode 0,1
Serial LED to display Connection,
DTR
0 = Connection
1 = DTR status