User`s guide

329
Entity
Instance
Parameter
Values
Equivalent Web Parameter
cmd n tremto
0 – 86400
seconds
Automatically log user out if idle
for h hrs m mins s seconds
This CLI value is entered in
seconds only.
local n access 0 – 4
Use access level
0 = Super
1 = High
2 = Medium
3 = Low
4 = None
8 = Read only
local n tlocto Free text field Never, h hrs, m mins, s secs
cmd n noremecho 0,1
Enable Remote command echo
0 = Off (default)
1 = On
cmd n prebanner
Valid filename e.g.
“welcome1.txt”
CLI Pre-Login Banner
cmd n postbanner
Valid filename e.g.
“welcome2.txt”
CLI Post-Login Banner
cmd n cmdnua 0 - 1023
Allow CLI access from X.25
address
local n transaccess 0 – 4
With TRANSIP, use access level
0 = Super
1 = High
2 = Medium
3 = Low
4 = None
8 = Read only
Miscellaneous
This section is for those configuration items that do not fit neatly into any other section.
Note:
Depending on the router model, some of these options may not be available.
Use Config n when the router powers up
The router maintains two configuration files, either of which may be invoked on power-up.
Select the required one from the drop-down selection box. Use this option with care as
selecting the incorrect configuration file can cause confusion.
Allow anonymous FTP login
When checked, this checkbox will enable the router to accept anonymous logins. The default
state is Off and the security implications of enabling this option should be considered
carefully before applying.
Additional FTP NAT port n
Standard FTP uses two well-known ports, a control port and data port. These are low
number ports and may be blocked by firewall rules. As such, it may be that an FTP server
may be listening on a non-standard control port. This parameter is used to specify the port