User`s guide

317
This drop-down selection box contains a list of the system entities.
All
Selecting this radio button causes all of the system entities
Instance
Selecting this radio button enable a text entry box that allows the user to enter the
instance of the selected entity.
Priority only applies to
This configuration section comprises a set of checkboxes, each checkbox controlling whether
the priority is applied to that interface instance. So for example, to apply the priority to PPP
interface 1, click on the checkbox labelled PPP 1.
Store a snapshot of the Traffic Analyser trace on the log drive
Selecting this checkbox causes a snapshot of the analyser trace to be stored on the USB
flash drive
If this event creates an Email alarm
Attach a snapshot of the Traffic Analyser trace
Checking this checkbox will cause a snapshot of the analyser trace to be attached to the
email.
After this event
Leave the Analyser trace
This option will leave the analyser trace unchanged.
Freeze the Analyser trace
This selection will cause the analyser to be “frozen”, i.e. no more logging will take place
until the email has been sent.
Delete the Analyser trace
This selection will cause the analyser trace to be deleted once the email has been sent.
Attach a snapshot of the Event Log
Selecting this checkbox will cause the eventlog to be attached to the email.
After this event
Leave the Event Log
Selecting this radio button will leave the event log unchanged.
Delete the Event Log
Selecting this radio button will cause the event log to be deleted after the email has been
sent.
Attachment List ID
This text entry box allows the user to specify which files to attach to the email. The ID
refers to the table of files.
Syslog Priority
This drop-down selection box contains the following options:
Emergency, Alert, Critical, Error, Warning, Info, Debug
Syslog Facility
This drop-down selection box contains the following options:
Kernel, User, Mail, System, Auth, Syslog