User`s guide

303
Parameter value
Interface type
10 UDP stream
12 LAPB 2
13 LAPB 2 PVC
14 VXN
15 SSL
CUD Mappings
Configuration - Network > Protocol Switch > CUD Mappings
Protocol Switch CUD mappings allow you to map an incoming call’s CUD (call user data)
from one value to another. The PID (protocol identifier) portion of the CUD (if present) is
maintained from input to output and is not involved in the comparison.
The Configuration - Network > Protocol Switch > CUD Mappings web page displays a
table with four columns in which you can specify the CUD In values, corresponding CUD Out
values and to which interfaces the mappings should be applied. The “interface” field defines
which output interfaces this mapping applies to. Wildcard characters are allowed, and In
each case the interface type to which the mapping applies can be selected from “ANY”,
“LAPD”, “LAPB0”, “LAPB1” “LAPB2” or “XOT”.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
cudmap 0-9 cudfrom 0-65536 CUD In
cudmap 0-9 cudto 0-65536 CUD Out
cudmap 0-9 Interface
0,1,2,3,4,12
0=Any
1=LAPD
2=LAPB 0
3=LAPB 1
4=XOT
12=LAPB 2
Interface